Honeywell FocusPRO TH6110D Manual page 5
Hide thumbs
Also See for FocusPRO TH6110D:
- Operating manual (28 pages) ,
- Installation manual (16 pages) ,
- Owner's manual (2 pages)
Advertisement
FocusPRO
TM
TH6110D Programmable
Thermostat
Insert finger into wire hole and pull to
remove wallplate
from thermostat.
Remove the wallplate @ore the ther-
mostat as shown at left, then fk>llow
directions
below for mounting.
1
]insert quick reference
card in slot
in back of thermostat.
2
Pull wires through wire hole.
3
Position wallplate on wall, level and
mark hole positions with pencil.
4
Drill holes at marked positions
as
shown below, then tap in supplied
wall anchors.
Insert quick reference
card
5
Place wallplate over anchors, insert
and tighten mounting
screws.
Drill 3/16" holes for drywall.
Drll 7/32" holes for piaster,
Advertisement
