End-Of-Cycle Signal; Using End-Of-Cycle Signal; Feature; And Finish Guard Feature - Whirlpool LGR6646BW2 Use And Care Manual

End-of-Cycle signal
(on some models)
The dryer sounds a signal to
let you know when the cycle is
finished. The signal is helpful
when you are drying perma-
nent press, synthetics, and
other item that should be removed from the
dryer as soon as it stops.
• On some dryers, the end-of-cycle signal is
not adjustable.
• On other dryers, the end-of-cycle signal
can be turned On or Off by a selector. The
end-of-cycle On/Off selector is part of the
Start Button on some models, and part of
the FINISH GUARD e selector on other
models. The various types of selectors are
described in the chart below.
Using End-of-Cycle signal and
FINISH GUARD feature
(on some models)
If your dryer has the end-of-cycle signal
and/or FINISH GUARD feature, they may be
tumed On or Off as shown below.
NOTE: Unless you turn Off the FINISH
GUARD feature, it operates at the end of
the cycle.
Your model may have any of the following:
• Separate knob selectors for end-of-cycle
signal and FINISH GUARD feature.
• A combination knob for both features.
• CLEAN TOUCH
TM
pushbutton pad for
beth features.
SE'n'ING SEPARATE COMBINATION CLEAN TOUCH
KNOBS OR KNOB OR SELECTOR
End-of-Cycle
Signal
OFF
Finish Guard
OFF
End-of-Cycle
Signal
OFF
Finish Guard
ON
End-of-Cycle
Signal
ON
Finish Guard
OFF
End-of-Cycle
Signal
ON
Finish Guard
ON
11