Stopping/Restarting Your Dryer; Selecting The Right Cycle And Setting - Whirlpool 3405792 Use And Care Manual

Whirlpool electric and gas dryers use and care guide
Table of Contents

Advertisement

Available languages

Available languages

Stopping/restarting your dryer

You can stop your dryer anytime during
a cycle.
To stop the dryer, either:
Open the dryer door.
OR
Turn the Cycle Control Knob
Off
to Off.
Off
NOTE:
The Cycle Control Knob should point
to an Off area when the dryer is not in use.

Selecting the right cycle and setting

The following pages describe the cycles
on your dryer. Refer to the charts on pages
10-11 for help in selecting drying cycles.
Drying guidelines
Always follow care label directions when
they are available.
The last few minutes of all cycles are without
heat to make the load cooler to handle.
To help reduce wrinkling, remove the load
from the dryer as soon as tumbling stops.
This is especially important for permanent
press, knits, and synthetic fabrics.
O PERATIN G YO UR DRYER
To restart the dryer:
1.
Close the door.
2.
Select a new cycle and temperature
(if desired).
3.
Push the Start Button.
Overdrying can cause shrinkage, static
cling, and damage to some fabrics.
Refer to pages 19-22 for information about:
– sorting clothes for drying
– choosing load sizes
– drying tips
– using dryer fabric softener sheets
– saving energy
– drying special-care items.
7

Advertisement

Table of Contents
loading

Table of Contents