Radio Frequency (Rf) - HTC Vive Tracker Developer Manuallines

Radio frequency (RF)

To establish a stable wireless connection between the Vive Tracker and the dongle, the OTA
performance of Vive Tracker cannot downgrade to more than 3dB when an accessory is
attached to the Vive Tracker.
The following are recommendations for better RF performance:
Except essential parts, such as the 1/4'' screw, electric connection pad (which connects with
the Pogo pin), and related circuits of the electric connection pad, metal parts of the accessory
should keep at least 30mm distance away from the antenna to avoid OTA performance
reduction when the accessory is attached to Vive Tracker.
The figure below illustrates the "keep out" area where only nonmetallic parts of the accessory
should be inside (spherical radius=30mm and the center is antenna feed point).
Vive Tracker Vive Tracker
Vive Tracker Vive Tracker
HTC Corporation
Figure: Restricted Area of Antenna
Developer Guidelines Developer Guidelines
Developer Guidelines Developer Guidelines
01/19/2017
5
HTC Confidential and Proprietary
Ver. 1.3