7 Status light Important: Always ensure that the play area is entirely clear of all objects, obstacles 4 Friction pad 8 Power button and other individuals when using Vive Tracker on any object intended to be moved while wearing the Vive headset.
Page 3
Tracker. Turn the tab on the bottom side of the plate power outlet to charge Vive Tracker. clockwise to screw Vive Tracker securely in place. Note: You can also connect Vive Tracker to a computer’s USB port to charge it. Stabilizing pin 1/4 inch bolt When Vive Tracker is fully charged, its status light either shows white if it is off or green if it is turned on.
Page 4
• To turn Vive Tracker on, press the Power button. until Vive Tracker is securely fixed in place. The Pogo pin • To turn Vive Tracker off, press the Power button for 5 supports electrical connection for the attached accessory.
Page 5
Pairing Vive Tracker If you’re using two controllers along with Vive Tracker, you • Once Vive Tracker is turned on for the first time, it will need to connect the dongle to enable hardware tracking. automatically pair with the headset or dongle.
Page 6
If so, click Update firmware. The status light shows: 3. Using the supplied USB cable, connect the Vive Tracker • Green when Vive Tracker is in normal mode to one of your computer’s USB ports.