HTC Vive Tracker Developer Manuallines page 27

For accessory makers: For accessory makers:
For accessory makers: For accessory makers:
If your accessory needs to simulate buttons of the Vive controller or transfer data to a PC
through Vive Tracker, it must support the following interfaces respectively:
1. Pogo pin
Please refer to hardware requirement section for detailed information on button
simulation.
2. USB full speed host and HID class. The Vive tracker will act as a USB device to transfer
data to/from the accessory.
Vive Tracker
Vive Tracker Vive Tracker Vive Tracker Vive Tracker
HTC Corporation
Device
Figure: Vive Tracker and accessory
Developer Guidelines Developer Guidelines Developer Guidelines Developer Guidelines
01/19/2017
USB
Data Transfer
24
Host Accessory
HTC Confidential and Proprietary
Ver. 1.3