Lesson 3: Tracking Line - Arduino Mega2560 Manual

Lesson 3: Tracking Line

In this lesson3, we will add a 3-Point tracking sensor module to the robotic car built in
Lesson 1.The software in this lesson will read data from the 3-Point Tracking sensor
module and automatically guide the smart car to move along the black track line in the
white ground.
OSOYOO Mecanum wheels robotic car chassis x1 (2xleft-wheels/2xright-wheels and Motor x 4)
OSOYOO Mega2560 board fully compatible with Arduino UNO/Mega2560 x1
OSOYOO V1.0 Wifi shield x1
OSOYOO Model X motor driver x2
OSOYOO 3-Point Tracking sensor module x1
OSOYOO Battery box x1
18650 Batteries(3.7V) x2
You must complete lesson 1 (assembling the car), before you continue on with this lesson.
We will add a 3-Point tracking sensor module to the robotic car built in Lesson 3.