Table of Contents
Advertisement
Excessive
Weight Hazard
Use two or more people to move and
install air conditioner.
Failure to do so can result in back or
other injury.
Installation Instructions
This air conditioner
has been designed for
installation through the wall, in a sleeve. It is the
responsibility
and obligation of the customer to
have this product installed by a qualified techni-
cian familiar with through-the-wall
installation.
OR
If you choose to install the air conditioner
yourself, read all installation instructions, as well
as the electrical requirements
and operating
instructions, before installing your unit. This will
help to avoid any installation problems and will
help ensure trouble-free
performance
of your new
air conditioner.
Before installing your
air conditioner
Installation
tips
l
Inspect the condition of the wall where the air
conditioner will be installed. Be sure it will
support the weight of the unit.
l
Watch out for the sharp metal fins on the front
and rear coils.
l
Be sure your air conditioner does not fall during
installation.
l
Do not install the air conditioner where the
plastic cabinet front will be exposed to a heat
source that raises the surface temperature
above 120°F.
Tools required
l
Phillips screwdriver
Installing your air conditioner
Installing
in an old sleeve
1. Remove the rear grille from the sleeve and
replace it with the new grille.
2. The part number label on the grille should face
the inside of the room.
NOTE: If your sleeve is of another make, you
can purchase a sleeve and adapter kit designed
to adapt your sleeve to this air conditioner. An
accessory kit is also available for window installa-
tion. Both kits are available from your local dealer.
continued
on next page
Advertisement
Table of Contents
