Table of Contents
Advertisement
Operating Instructions
Flre Hazard
Do not use an extenslon
cord.
Dolng so can result In death, fire, or
electrical
shock.
Starting your air conditioner
Electrical
Shock Hazard
Plug Into a grounded
three prong outlet.
Do not remove ground
prong.
Do not use an adapter.
Do not fuse neutral or grounding
clrcult.
Do not use alr condltloner
wlth front
panel removed.
Failure to follow these lnstructlons
can
result In death, electrlcal
shock, or
serious
Injury.
1. Set Exhaust
Control to CLOSED for maxi-
mum cooling results.
2. Set Fan Control to the desired setting.
LOW COOL . . . . . . . . . . . . . . . . . . . . . . . . . . for sleeping comfort
HIGH COOL . . . . . . . . . . . . . . . . . . . . . . . . for maximum cooling
LOW and HIGH FAN . . . . . . . . for circulating room air
when no cooling is desired
3. Turn the Thermostat
Control to the desired
setting. You can adjust the air conditioner's
cooling performance
by turning the Thermo-
stat Control clockwise for more cooling or
counterclockwise
for less cooling. You will
need to experiment
to find the setting which
suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least 3 minutes before turning
it back on or you may blow a fuse or trip a circuit
breaker.
10
Advertisement
Table of Contents
