Replacement Of The Head - APRILIA C361M Workshop Manual

UPDATES ENGINE C364M
4.2.2.

REPLACEMENT OF THE HEAD

•
Clean the gasket beds and make sure they are not
damaged.
•
Insert the head with its gaskets and cross-tighten the
four bolts to the correct torque value.
•
Spread sealant over the seat of the temperature sensor
and tighten it to the correct torque value.
•
Insert the plug and tighten it to the correct torque value.
•
Replace the recirculation duct in the head and close
the clamp.
4 - 6
ENGINE C364M