39
40
41
42
26
CLEANING THE FILTERS
To maximize performance, make sure that:
• The various filters are not clogged;
• The lid gasket is properly placed in its housing.
All filters are washable with water.
Filter lid:
• Rotate the float counter-clockwise.
• Remove the filter and clean.
Upper motor filter:
• Remove the filter from its housing and clean.
Output filter:
• Remove the rear grid by pressing on the side and
clean.
Motor cooling filter:
You should check the filter cleanliness after each
use to ensure proper cooling of the motor and avoid
overheating.
• Remove the grid by turning it counter clockwise and
extract the filter from its housing.
• Clean the filter and put it back into place by closing
the grid.
39
40
41
42