Table of Contents
Advertisement
23
24
25
26
16
CLEANING PROCEDURE:
• Turn on the main switch.
• Wait until the display indicates "6 bar" (pressure
reached) for the steam to be ready. To generate steam,
you should wait for about 2 min. During the heating
phase the display shows the temperature in the boiler.
• Adjust the steam flow according to the surface to be
cleaned.
• Select the accessory and attach it to the handle or
extension hoses according to the surface to be treated.
• To start steam output press the red trigger on the
handle.
• The power and strength of the steam are in your
hands, ready to ensure unprecedented cleaning and
hygiene!!
For the best application of each accessory, see
Accessories on page 20.
• Use the appliance power very calmly; it will indicate
when the water is exhausted. A sound signal and "H
flashing message on the display will warn you.
• Water refill see page 8.
• To resume work, simply press the trigger on
the handle or button 3 on the control panel.
23
24
25
26
O"
2
Advertisement
Table of Contents
