Table of Contents
Advertisement
01
02
03
04
8
OPERATION
WATER FILLING
• Remove the cap by rotating counter-clockwise and fill
the tank with about 1.5 litres of tap water.
• Replace the cap and screw into place.
The boiler only works if the refill tank contains water.
Do not put any anti-scale additive, detergent or
perfume into the refill tank. This causes severe
damage to the boiler and the continuous refill
circuit.
Do not use 100% distilled water, always dilute
with 10% tap water.
PREPARATION
• Open the front panel over the compartment and insert
the steam/vacuum hose. The shape of the hose allows
error-free insertion.
Insert it firmly until you feel the lock button click.
• Insert the plug into a grounded mains socket: 110-120
V, 60 Hz. The socket should be protected against
short circuits and ground faults (16 A and Id = 30 mA
differential thermal magnetic circuit breaker).
• Turn on the appliance by the turning the power button
to position I.
• Select the desired functions
IMPORTANT!
IMPORTANT!
01
02
03
04
Advertisement
Table of Contents
