Table of Contents
Advertisement
05
06
07
08
10
Cyclon
The Cyclon function allows using the appliance as a
powerful vacuum cleaner, filtering and capturing even
smallest and most insidious dust.
VACUUMING PROCEDURE
• Turn on the main switch.
• Choose the appropriate accessory for the surface to
be vacuumed, and attach it to the handle by turning the
snap closure under the hose to the left
• Attach the brush to the extension hoses, or directly
onto the handle.
For a proper water filter operation you should
always fill water in the recovery tank up to the
level marked in the separator.
• To start vacuuming press the button on top of the
handle, vacuuming starts with speed at the 3rd level. To
change speed, press and hold the button for 2 seconds.
To turn off the vacuum, press once.
VAP FILTER FUNCTION
• The steam filter is inserted automatically.
If you want to turn off the steam filter press and hold
button 3 on the control panel for 5 seconds. To turn it
back on press button 3 again. When the steam filter is
turned on, the display shows "F On" (Filter On).
vacuum cleaner
IMPORTANT!
05
06
08
07
Advertisement
Table of Contents
