Cisco ONS 15454 Unpacking And Installing page 25

Four-shelf and zero-shelf bay assembly

Hide thumbs Also See for ONS 15454:

Figure 23

Wire color

WHT/ORN

ORN/WHT

RED/BLU

BLU/RED

BRN/WHT

WHT/BRN

Because there are six alarms on the FAP, some alarms will be double-wrapped on one of the four

Note

environmentals of the alarmed shelf.

The AIC-I requires a shelf assembly running Software Release 3.4.0 or later. The AIC-I uses wire-wrap

Note

field pin assignments according to the layout in

that has been upgraded to 3.4.0. In this case the backplane pin labeling will appear as indicated in

Figure

78-13271-05

FAP and power close-up of alarming wire color

25. But you must use the pin assignments provided by the AIC-I as shown in

Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly

Wire color

WHT/GRN

GRN/WHT

WHT/BLU

BLU/WHT

WHT/SLT

SLT/WHT

Alarming

Figure

24. The shelf assembly may be an existing shelf

Fuse and Alarm Panel Wiring

Figure

24.