Advertisement
© 2014 Garmin Ltd. or its subsidiaries
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its
products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to
www.garmin.com
for current updates
and supplemental information concerning the use of this product.
Garmin
®
, the Garmin logo, and ANT+
®
are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be used without the express
permission of Garmin.
This product is ANT+
certified. Visit
www.thisisant.com/directory
for a list of compatible products and apps.
®
Advertisement
Need help?
Do you have a question about the Speed Sensor and is the answer not in the manual?
Questions and answers
Как активировать датчик скорости и синхронизировать с велокомпьютером Garmin
To activate the Garmin Speed Sensor and sync it with a Garmin bike computer:
1. Place and hold the speed sensor on top of the wheel hub.
2. Pull the strap around the hub and attach it to the hook on the sensor.
3. Bring the Garmin bike computer within 3 meters of the sensor.
4. Stay at least 10 meters away from other ANT+ sensors during pairing.
5. Follow the pairing instructions specific to your Garmin device (check the device manual).
After the first pairing, the Garmin device will automatically recognize the sensor when it is active.
This answer is automatically generated