Advertisement
Set...
Installing the oven accessories
1. Install telescopic slides (where supplied) to the
side racks. Refer to installation guide supplied
with oven slides.
2. Insert side racks
There is a left hand and right hand version (see image).
1. Insert the rear peg into the rear access hole,
ensuring that the peg is fully inserted.
2. Then locate the front peg into the front access hole
and push in firmly.
3. To fit a shelf or tray to side racks:
1.
Locate the rear edge of the shelf
in between guide rails of the side
rack. Ensure the same rail positions
on both sides of the oven are being
engaged.
2.
With the front edge raised, slide the
shelf into the oven.
3. Once the detents have passed the
front edge of the side rack, the shelf
can be pushed completely in.
Detent
Set the time
You must set the time before you can operate your
appliance.
1.
After the appliance has been electrically connected,
press
to turn
2.
To set the time, press until settings is highlighted,
and press
.
3.
Then, "Set time of day" is highlighted, press
4.
Press
or
to set the hour and press
5.
Press
or
to set the minutes and press
6.
Press
to return to function menu.
4. Fit shelf/tray (where supplied)
to telescopic slides
1. Push the shelf or tray along the
top of the slide until it hits the
back post.
.
.
.
.
Left hand side rack
front peg
rear peg
2. Drop the front of the shelf or tray
Shelf
Back post
3. When fully inserted the shelf/tray
Condition the oven
New appliances can have oil or residue left from
manufacturing. You will need to heat your oven for 2
hours before using it for the first time.
1.
Press
and select "Fan Bake" function
using
or
2.
Press
.
3.
Press
or
and heat for approximately 2 hours. Please ensure
that the room is well ventilated during this process.
onto the slide ensuring it sits behind
the front post of the slide.
Front post
Shelf
should not interfere with the closed
oven door.
(to burn off any residue)
symbols.
symbols to set the oven at 180°C
Advertisement
