OfficeSource Wellness Series Operating Instructions

OPERATING INSTRUCTIONS

1. To Adjust Seat Height:

While seated, reach under the right side of the chair to find the
handle. Lift the handle and raise your body up slightly to allow the
chair to rise to the desired height. To lower the seat, lift the
handle while applying more weight downward on the seat. The
chair will descend until the handle is released or the chair
reaches the bottom position.

2. To Operate Tilt Lockout:

While seated, reach under the right side of the chair to find the
height adjustment handle. Pull the handle all the way out (away
from the gas lift) to allow the chair to tilt backwards. To lock the
chair in the upright or vertical position, sit upright and push the
handle in towards the gas lift.

3. To Adjust Tension on the Tilt Mechanism:

Reach under the front center of the chair, grasp the round knob
and turn counter- clockwise to make the tilt mechanism firmer
(stiffer). To make the tilt mechanism less firm, turn the knob
clockwise until the desired resistance is found.

4. To Activate Perch Lumbar:

While seated, lean forward so that no pressure is applied on the
lumbar support. Then lift the lever upward and hold to bring the
lumbar support outward. Once desired support is reached,
release lever to lock lumbar. To bring lumbar support back to
original setting, lift lever upward and lean back or apply more
pressure on the lumbar. Push back until lumbar is flush with back
cushion then release lever to lock in place.

5. To Adjust Arm Height:

Pull up the buttons and hold to allow the arms to move up and
down freely and then release the button once the desired height
is reached.
6. 360° Swivel:
360° seat swivel.
Item Number: 49331
W e l l n e s s C o l l e c t i o n
T a s k , M i d B a c k C h a i r