Sony WF-XB700 Help Manual page 33

1. Select [Settings].
Touch [Bluetooth].
2.
Touch the switch to turn on the Bluetooth function.
3.
Touch [WF-XB700].
5
If Passkey (*) input is required, input "0000".
The headset and iPhone are paired and connected with each other.
You will hear the voice guidance say, "Bluetooth connected", from the left unit of the headset.
If they are not connected, see
If [WF-XB700] does not appear on the display of the iPhone, try again from the beginning of step 4.
*
A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
About the instruction manual video
Watch the video to find out how to register a device (pairing) for the first time.
https://rd1.sony.net/help/mdr/mov0016/h_zz/
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with your iPhone.
To delete all Bluetooth pairing information, see
Note
If pairing is not established within 5 minutes, pairing mode is canceled, and the headset turns off. In this case, set the headset
into the charging case, and start the operation again from step 1.
Once Bluetooth devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
"Connecting to a paired iPhone
"Initializing the headset to restore factory
33
".
settings".