Electronic Pinouts And Schematics; Spike-2 Cpu Node 0 - Stern Pinball NETFLIX STRANGER THINGS Series Service And Operation Manual

4. ELECTRONIC PINOUTS AND SCHEMATICS

4.1 SPIKE-2 CPU NODE 0

509-1003-01
DIRECT SWITCH MAPPING (CN25)
The coin-door diagnostic switches are connected directly to the CPU node via the Cabinet Node. Note that both the CPU and
Cabinet nodes are required for diagnostic switch operation.
ID Name Conn.
C1 DIP 1 -
C2 DIP 2 -
C3 DIP 3 -
C4 DIP 4 -
C5 DIP 5 -
C6 DIP 6 -
C7 DIP 7 -
C8 DIP 8 -
C9 Service Select CN25
C10 Service Plus CN25
C11 Service Minus CN25
C12 Service Back CN25
CONNECTORS
ID Connector Type Description
CN1 5-Pin .156" Header Backbox 2-channel amplified speaker out
CN2 3-Pin .100" Header Console Port
CN3 7-Pin .100" Header Headphone connector
CN4 2-Pin .156" Cabinet 1-channel amplified speaker out
CN5 7-Pin .100" Header Line In/Out
CN6 34 Pin 2.00mm Header LCD display connector
CN7 5-Pin .156" Header 48V supply from main power supply
CN8 6-Pin .100" Header SPI Serial
CN9 USB USB connector - for software updates,
audit dumps, and expansion modules
CN9 USB USB connector - for software updates,
audit dumps, and expansion modules
CN10 HDMI HDMI Out
CN11 RJ45 SPIKE node bus - to cabinet node N1
CN12 RJ45 SPIKE node bus - To Topper accessory Kit
CN13 SD CARD SD Card connector
CN14 5-Pin .100" Header LCD Backlight
CN15 3-Pin .100" Header Backbox Light
CN16 4-Pin .100" Header 3.3v / 5v / 12v
CN17 ETHERNET ETHERNET connector
CN21 SATA Header SATA connector
CN22 RJ45 SPIKE node bus - to playfield node
CN25 12-Pin .100" Header Dedicated switch inputs - service, volume
switches
™/© Netflix, Inc. 2019. Used with permission.
Input Input Wire GND Ground Wire
Pin Pin
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
1 LGN-GRY 11 BLK-WHT
2 LGN-VIO 11 BLK-WHT
3 LGN-BLU 11 BLK-WHT
4 LGN-BLK 11 BLK-WHT
STRANGER THINGS LE / PREMIUM MANUAL 500-55Q2-01
ELECTRONIC PINOUTS AND SCHEMATICS
Location Type
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
CPU Node
Coin Door
Coin Door
Coin Door
Coin Door
COMPONENTS
ID Name
S1 DIP Switches
S2 Reset Switch
SD CARD (CN13) For system SD card. Note: only to be removed if instruct-
ed to by Stern Service.
BT1 BR1225 3V Lithium battery for game clock between
power cycles
STATUS LEDS
LED ID Name Color
48V +48V Supply In Red
3.3V +3.3V Logic Red
5V +5V Logic Red
12V +12V Backbox Red
Illumination
VA +30V Audio Red
VNB +9V Node Bus Red
5V (CPU) +5V Logic Red
SDIO ACT Not Used Red
STATUS CPU Heartbeat, Red
System Status
μSD ACT Activity indica- Red
tor for micro SD
Card
D23 Netbridge Red
Status
Address Part Number
0-SW-0 -
0-SW-1 -
0-SW-2 -
0-SW-3 -
0-SW-4 -
0-SW-5 -
0-SW-6 -
0-SW-7 -
0-SW-9 180-5192-04
0-SW-10 180-5192-02
0-SW-11 180-5192-02
0-SW-12 180-5192-00
Description
ON: Main system power is connected. OFF:
No 48V system power. Check power supply
connections, cables, and fuses.
ON: Logic power supply is good. OFF: Logic
power supply bad, call tech support.
ON: Logic power supply is good. OFF: Logic
power supply bad, call tech support.
ON: Back box LED power good. OFF: Back-
box LED power bad, call tech support.
ON: Audio power supply is good. OFF: Audio
power supply off, call tech support.
Power for the Node bus. ON: Power for
node bus good. OFF: Power to node bus not
detected, call tech support.
ON: Logic power supply is good. OFF: Logic
power supply bad, call tech support.
Should remain unlit as it is not currently used.
Double blink ~1/2 second: Good, Processor
running. OFF: Processor not running, call tech
support.
Should blink rapidly when reading or writing to
micro SD card.
Should blink once every ~1/2 second.
23