Table of Contents
Advertisement
PEBCO®
DUSTLESS LOADING/SELF-CONTAINED DUSTLESS LOADING SPOUTS
5
OPERATION
!!! WARNING !!!
Before beginning a loading operation, make sure the area around the spout is clear of personnel. As direct
exposure to the product stream can result in seriously injury or death.
1. After the vehicle/container has been positioned with its hatch directly below the spout, open the
vehicle/container hatch.
2. Once the hatch has been opened, begin lowering the loading spout to the vehicle or container opening.
3. The dust extractor should be turned on at this point.
4. Continue to lower the outlet assembly until it is firmly seated in the vehicle/container hatch.
5. Start the product feed. The vehicle or container should be properly filled with little or no visible dust.
6. When the vehicle is full, raise the spout completely and turn off the dust extractor. This completes the
loading cycle.
15
OPERATION
Advertisement
Table of Contents
Need help?
Do you have a question about the Dustless Loading Spouts and is the answer not in the manual?
Questions and answers