Scdls Specific Equipment; Additional Requirements - PEBCO Dustless Loading Spouts Manual

PEBCO®
DUSTLESS LOADING/SELF-CONTAINED DUSTLESS LOADING SPOUTS
3.3

SCDLS SPECIFIC EQUIPMENT

•
•
•
3.4

ADDITIONAL REQUIREMENTS

Prior to long-term storage, and start-up after storage, please refer to any and all applicable
instructions published by individual component manufacturers.
Headers should be sealed from the environment, and inspected for rust or corrosion prior to
installation if stored for a period longer than six months. If rust is found, it must be removed
before the unit is installed.
Filters should be stored in an area protected from pests and excess humidity. Temperature
should not exceed 100°F (38°C). Do not stack. Storing filters mounted inside the assembly is
acceptable so long as all these conditions are satisfied by the storage area for the assembly.
Hose assemblies must be removed & capped/plugged.
8
STORAGE RECOMMENDATIONS