Reset; Usb Upgrade - Magic PM160 User Manual

Parameters of Attendance interface state as below:
Duplicate Punch Period (m): In set time period (unit: minute), repeated attendance record of a
user will not be saved (the valid time is 1~999999 minutes).
Display User Photo:
No Photo:
Take Photo, no save:
Take photo and save:
Save on successful verification: Take and save photo as users verify successfully.
Save on failed verification:
Attendance Log Alert: When remainder log capacity is less than the set value, the device will
prompt an alert message automatically. The valid value is 1~9999.
Cyclic Delete ATT Data: When Attendance records reach to the maximum capacity, the amount
to delete attendance Data one time. The valid value is 1~999.
Confirm Screen Delay (s): The delay to display the verification result, the value is 1~9.
Expiration Rule: The choices for the function of the users' validity.
Expiration Rule Options: The settings for the end of validity.

Reset

Reset communication settings, system settings, personalize settings etc.

USB Upgrade

The firmware program of device can be updated with upgrade package in USB disk. You are not
suggested to upgrade. If you need the upgrade file, please contact our technical support
personnel.
18 P160 User Manual
The device does not take photo as users verify.
Take photo, but not save photo as users verify.
Take and save photo as users verify.
Take and save photo as users fail to verify.