Serial Comm; Pc Connection; Adms - Magic PM160 User Manual

Serial Comm

PC Connection

To improve the security of attendance data, connection password needs to be set here. Enter into
Comm."PC Connection"
ADMS
Settings used for connecting with ADMS server. Enter into "Comm""Cloud Server Setting".
16 P160 User Manual
Serial port: When serial port （RS232/RS485）
1.
is used for communication of device and PC,
this setting need to be checked:
Baudrate: Used for communication with PC.
2.
RS232 is recommended for high speed.
Note: There are 5 baudrate types available for
3.
RS232: 9600, 19200, 38400, 57600 and 115200;
"9600" is not applicable to RS485. Reboot the
device to make the change active.
1. Comm Key: Set 1-6 digits connection
password, the password must be input when
PC software is to connect device to read data.
2. Device ID: The ID is in the range of 1-254. If
RS232 or RS485 is enabled, this ID needs to be
input in the software communication interface.
1.
Enable Domain Name: When the domain
name mode is enabled, you access a website
using a domain name in the format of http://;
otherwise, you must enter an IP address for
website access.
2. Server Address: IP address of Webserver
3. Server port: Port used by Webserver
Server:
4. Enable Proxy
proxy function, set the IP address and port
number of the proxy server. This option
indicates whether to use a proxy IP address. You
may choose to enter the proxy IP address or the
server address for Internet access, whichever
you like.
When you enable the