Advertisement
12. Insert (2) Wood Screw (H) into the pre-drilled holes at the bottom of each Shelf (C) by using a Phillips
Head Screwdriver (not included). Do not over tighten.
13. Re-tighten all bolts and screws at this time.
E
F
G
H
14. Turn the Bedside Table upright.
15. Put the drawer box back into the Top Unit (A).
16. When needed, adjust the levelers located under the legs to keep the bedside level.
Care Instructions:
•
Dust often using a clean, soft, dry, and lint-free cloth.
•
Blot spills immediately and wipe with a clean, damp cloth.
•
We do not recommend the use of chemical cleansers, abrasives, or furniture polish on our lacquered
finish.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight.
Re-tighten if necessary
Date: 2013-May-31
Rev:
G
F
4x
4x
4x
8x
www.pbteen.com
H
Page 4 of 4
Advertisement
