Electrolux EWF1141AEWA User Manual page 14

14 www.electrolux.com
Time Manager
This option allows you to adjust the wash
time. Press this touchpad repeatedly to
decrease or increase the wash time
according to the soil level of your wash.
Use the table below as a guide.
Light
Time Manager function is not
available when
Delay End (
Before you start the program, this option
makes it possible to define the end of the
washing program from minimum of 1 hour
to maximum of 20 hours.
If program duration is longer than
3 hours, minimum Delay End
option starts from 4 hours.
Press the Delay End touchpad to choose
the end time as you wish. The display
shows the number of hours and the
indicator beside the touchpad is on.
This option must be selected after
choosing the wash program, and
before pressing the "Start/Pause"
touchpad.
For example, if the program duration of
your selected program is 3.20 hours and
you define the "Delay End" time to 6
hours. This means your wash program
will finish in 6 hours. (See diagram)
Pressed
Start/Pause
After selecting Delay End time, press
Start/Pause touchpad to start the
program. Machine will then countdown
and update time on the display every
hours until it reaches the starting point of
the wash cycle.
Soil Level
>> Medium >>
) Touchpad
"Delay End" Time : 6 hrs.
Countdown Working Cycle
2.40 hrs. 3.20 hrs.
Start the
Program
If you wish to modify or cancel Delay End
option after starting the program, follow
the steps below:
– set the washing machine to PAUSE by
pressing "Start/Pause" touchpad;
– deselect this option by pressing
"Delay End" touchpad repeatedly till
the display shows delay time "
Heavy
press the "Start/Pause" to start the
–
program.
is on.
Select "
the sensors for the dirt and detergent
residue.
The "SensorWash" is switched ON
by default. If you want to turn OFF
the sensor press this touchpad
once. (Please see the table
"Program Options Compatibility"
for which programs can be used
with this option.)
When using this option, the washing
machine will automatically check the dirt
level and detergent residue in your
laundry. It will automatically adjust the
washing time and numbers of rinses
according to the load to make sure that
your clothes are really clean.
The SensorWash technology consist of 2
different sensors for detection:
1) The 1
level at the start of cycle and automati-
cally calculates the actual time needed
to remove the level of dirt in the wash;
from low dirt levels all the way to the
maximum dirt level.
End of
Cycle
( ) Touchpad
" option to turn ON
st
Turbidity sensor detects the dirt
The initial time displayed on
the control panel indicates the
time needed for the maximum
dirt level.
";