Westinghouse WST2025ZE Owner's Manual page 9

OPERATING INSTRUCTIONS
HOW TO CHOP ONLY IN THE
CONTAINER
The Knife Blade's special design processes
food quickly and evenly. It can perform a
variety of tasks, including chop, grind, mix,
crumb and mince.
TO ASSEMBLE
1. Take the Container and place it on the
Base. Line up the Locking Tabs and
turn clockwise until the Container locks
into place.
2. Grasp the Knife Blade by the plastic
part and lower it onto the Center Post.
TO USE:
1. Place the food to be processed into the
Container.
2. Line up the Food Chute/Cover with the
Locking Tabs on the Container, making
sure that the Pin in the Food
Chute/Cover is inserted into the Knife
Blade Hub. Turn Cover clockwise until
you hear a click. Put the Food Pusher
into the Food Chute.
3. Press the desired ON/PULSE Switch
function. Check results and repeat, if
necessary, until the desired consistency
is reached.
4. After processing food, press Switch to
the OFF position. Allow the Knife
Blade to stop rotating before adding
more food or removing the Food
Chute/Cover.
5. Carefully remove the Knife Blade from
the Container before emptying the
contents of the Container.
(Refer to Figure 4):
8
(Continued
Figure 4