Table of Contents
Advertisement
OM-2065 / Operation and Maintenance Manual
90SB51 / Spec. 7015-3 / Frequency Converter
(3) "NOMENCLATURE" Column
The item identifying name appears in this column. The indenture method is used to indicate item
relationships. Thus, components of an assembly are listed directly below the assembly name
and indented one space.
(4) "EFF" (Effectivity) Column
This column is used to indicate the applicability of parts to different models of equipment. When
more than one model of equipment is covered by a parts list, there are some parts which are
used only on one model. This column is used for insertion of a code letter ("A", "B", etc.) , to
indicate these parts and to identify the particular model on which they are used. Since this
manual covers only one model of equipment, the effectivity column is not used in this manual.
(5) "QTY" (Quantity) Column
Numbers in this column indicate the quantity of parts required for an assembly or subassembly
in which the part appears. Numbers in this column do not necessarily indicate the total number
of parts used in the complete end item.
Chapter 4-1
Page 2
Nov 01/90
Advertisement
Table of Contents
