Advertisement
Oticon Radio Model - Quick Installation Guide
Aurora miniRITE 312 T Rc
Radio Model Name:
On the bottom side of the main PCB of the Aurora miniRITE 312 T Rc radio model the connector for the speaker unit assembly (where the wire antenna for the
Bluetooth radio is an integrated part), the programming connector, EEPROM memory and coil antenna for the 3.84 MHz radio can be seen:
The most important parts inside the Engine module are a Digital-Signal-Processor (DSP), a radio Front-End (FE) chip for the 3.84 MHz radio part and an RF chip
for the Bluetooth radio part – all mounted on a small rigid PCB again mounted on the main flex PCB. The Aurora miniRITE 312 T Rc radio model also includes all
voltage regulators and buffered data programming inputs on board. The DSP is the main processor controlling the functionality of both radios in the Aurora
miniRITE 312 T Rc radio model.
The Aurora miniRITE 312 T Rc radio model is intended to be installed in Oticon, Bernafon, Sonic and affiliated wireless hearing aid devices of the miniRITE T 312
Rc (Receiver-In-The-Ear) wearing style.
Oticon A/S
Main +45 39 17 71 00
Aurora mini RITE-T Radio Model – Main PCB – Bottom side
Kongebakken 9
DK-2765 Smørum
Fax +45 39 27 79 00
Denmark
PEOPLE FIRST
www.oticon.com
CVR-no. 42334219
3
Advertisement
