Connecting Your Personal Computer - Westinghouse SK-19H210S User Manual

3. HDTV/ACCESSORY SETUP

Connecting Your Personal Computer

Before making any connections, make sure all equipment is turned off.
Connection Types
VGA Connection
—Connect a 15-pin analog VGA cable (not supplied) from your
computer's "VGA OUT" port to the HDTV's "VGA" port
—Connect a stereo mini cable from your computer's "AUDIO OUT" port
to the HDTV's "AUDIO IN" port
DVI-D Connection
—Connect a Digital DVI-HDMI cable (not supplied) from your computer's
"DVI-D OUT" port to the HDTV's "HDMI" port
—Connect a stereo mini cable from your computer's "AUDIO OUT" port
to the HDTV's "AUDIO IN" port
Power
Turn on your HDTV (wait a few seconds for it to power up)
Turn on your computer
—The HDTV will automatically adjust to the computer's resolution
Computer Settings
For optimal picture quality, set your computer's timing mode to VESA™
(Video Electronics Standards Association) 1440x900 at 60Hz
Refer to your computer's graphic card User Guide for directions to set
this timing mode.
If using Microsoft Windows OS, please check its Display Properties.
20
20