Toshiba RDA-S1601HA / D015-ME Owner's Manual page 7

All indicators are displayed in the display example below for reference. During use, only the selected options will
Display
be displayed on the screen.
● blinks on the display of the remote control the first time the
leakage breaker is turned on. The initial settings are progressing
while
disappeared.
Running mode indicators
Indicates the running mode selected.
SETTING indicator
Displayed when setting the timer or other
functions.
Time indicator
Indicates the time of the timer.
(Indicates a check code when an error
occurs)
Check indicator
Displayed when the protective
device activates or an error
occurs.
Filter indicator
Clean the air filter when this appears.
Timer indicators
When the timer setting button is pressed, it
changes in this order: .
No display
Test run indicator
Displayed during test run.
is blinking. Start to use the remote control after it has
Central control indicator
Displayed when the air conditioner is controlled centrally and used with
central control devices such as the central remote control.
If the use of the remote control is prohibited by the central control,
[
remote control is pressed, and the buttons do not function. (Settings
that can be configured on the remote control differ depending on the
mode of the central control. For details, read the Owner's Manual for
the central remote control.)
●The LCD may temporarily become
] blinks when the ON/OFF, MODE, or TEMP. button on the
UNIT No. indicator
Indicates the unit Number of the indoor unit selected using the
UNIT button, or the indoor/outdoor on which an error has occurred.
Temperature setting indicator
Indicates the temperature setting.
Running mode lock indicator
Displayed when the MODE button is
pressed at a time when the air
conditioner has been set to cooling or
heating by the air conditioner
administrator.
Remote control sensor indicator
Displayed when the remote control
sensor is used.
Prep. display
This indicates preparation status on some models.
Pre-heat indicator
Displayed when heating is starting or while defrosting.
While the indicator is displayed, the indoor fan is stopped
or the air circulation is running.
No function indicator
Displayed when there is no function available for the
pressed button.
Power saving display
Displayed during capacity saving mode.
*Cannot be used when combined with SMMS.
Air volume display
●For floor type (direct type, duct type) air conditioners
this displays only when it is set to high.
Note
blurred due to static electricity.
6 6