Table 32 - Output Parameters - Western Digital T13/2132-D User Manual

Western digital computer drive user manual
Table of Contents

Advertisement

T13/2132-D Revision 3
8.27.2.3 Output Parameters
The following output parameters (see table 32), match the parameters defined in 8.27.1. No other return
parameters are necessary for this transport.
Out Description
AL Undefined
AH
Remaining Values Reserved
All other registers Preserved
Carry flag 0b if AH is cleared to zero
1b if AH is 1through FFh.
68
Table 32 — Output Parameters
Value Description
00h No Error
01h AX = 50D7h not implemented
80h A condition has occurred which prevented successful command
completion. This may be due to a busy device, a timeout, a bus reset,
short packet, or other event. The host should issue a
Request-Sense-type command in the required protocol.
97h There is no support for the indicated logical drive, although Function
50D7h is recognized.
C3h PSSP is too short.
Working Draft Enhanced Disk Drive - 4 (EDD-4)
June 23, 2010

Advertisement

Table of Contents
loading

Table of Contents