Table of Contents
Advertisement
Each switch controls 2 resistors on the left and right of the radiator separately. If
desired, a single resistor can be left in the circuit.
Then turn the temperature control knob clockwise as shown in Figure-2.
Bring it to a level you want and leave. It is stated in Table 2 that which radiator
temperature corresponds to which of 5 different levels.
When the temperature of the heat transfer fluid in the radiator reaches the set
value, the heating operation stops. The heating automatically resumes when the
temperature of the liquid has dropped to 3 ° C. Therefore, the radiator is operating
at the optimum energy consumption required to meet the heat loss of the
environment in which it is located.
Level
Oil Temperature
1
15 °C
2
30 °C
3
45 °C
4
65 °C
5
80 °C
Table – 2
11
Advertisement
Table of Contents
