Table of Contents
Advertisement
Figure- 6
BEFORE FIRST START
Radiator works with 230 V. 50 Hz. alternating current. Do not connect the device
to an incorrect power source. Make sure that the mains voltage
matches the
operating voltage of the radiator. Always connect the radiator to an insulated and
grounded power line.
The mains cable used in the radiator has a cross section of 3 x 2,5 mm² and has
a resistance for maximum flow 20 amperes flow. If this cable will change, please
make sure that the new cable is the suitable one. This cable can only be changed
by the manufacturer or by specialist technical staff.
9
Advertisement
Table of Contents
