Advertisement
Aug-19
Fig 6.
1. Install table and clamp with bolt (provided)
Fig 7.
Head Assembly
1. Position the head assembly over the column and slide into position.
Align head frame with table base
2. Fix set screws on right side of head to lock head into position, tighten
screws with allen key
Fig 8.
Feeding Handle Installation
1. Screw knob on each feeding handle, install onto hub of pinion shaft
Fig 9.
Arbor & Chuck Installation
1. Insert Arbor onto spindle. Pull feed handle down to press arbor into
position
2. Open chuck jaws completely by turning attached chuck key counter-
clockwise to the end.
3. Place a piece of wood on the table to protect chuck nose
Fig 10.
1. Install the chuck to the arbor and
tighten
Fig 11.
1. Install the knob and screw of upper
pulley cover
Ensure the drill press is firmly fixed in place to table or floor following assembly
Made in China to TQB Brands Pty Ltd specifications
Visit us at www.tqbbrands.com.au
Product Code: CH16NT
Page 5
Advertisement
