IBM PureFlex System Installing And Configuring page 29

If you do have a top of rack switch, use the top of rack switch to connect to the switch chassis.
Connect to top of rack switch 1, port 40, on the lowest 8052 management switch.
Figure 16. Connecting to port 6 on the switch chassis
Figure 17. Connecting to port 40 on the top of rack switch
3. On your device, open a browser window.
4. Ensure that your device is set to IP address 192.168.93.5, subnet mask 255.255.255.0, and gateway
192.168.93.217.
5. In the address field, type https://192.168.93.100.
Note: Ensure that you type https://. The s means that you will be using the Secure Sockets Layer
(SSL) when you communicate with the CMM.
If you have additional chassis, type https://192.168.93.102 for the second chassis and
https://192.168.93.104 for the third chassis.
6. Accept any security exceptions to continue.
7. In the IBM Chassis Management Module sign-in window, type the user name and password. The
user name is USERID and the password is PASSW0RD.
Installing and configuring the system
17