IBM PureFlex System Installing And Configuring page 20

Figure 7. Removing the screws that attach the bracket to the rack, and loosening the three tension screws
4. Collapse the bracket.
Note: If the power supply is preventing the bracket from collapsing completely, slide the power
supply in enough to allow the bracket to collapse fully.
5. Grasp the shipping bracket and remove it from the rack.
6. Reseat the IBM Storwize V7000 control canisters.
a. Press the latches (A) on the unseated IBM Storwize V7000 control canister to access the control
canister handle.
8
PureFlex System: Installing and configuring IBM PureFlex System