Connecting The Luminaire To The 24V Supply Voltage (Selv Version); Operation; Switch-On And Switch-Off - Waldmann SLJ Series Instructions For Use Manual

ENG
5.2 Connecting the luminaire to
the 24V supply voltage (SELV
version)
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the luminaire.
X Connection by a skilled electrician
only.
X Compare the mains voltage with
the nominal voltage and the fre-
quency specified on the rating
plate and make sure that they are
identical.
X Operate the luminaire at safety
extra low voltage (SELV) only.
X USA and Canada: This device
must be connected to a class 2
power supply.
Farbe
brown
blue
Tab. 2: Assignment of the wires.
NOTE: The light is protected against polar-
ity reversal.
X Connect both wires to a suitable power
supply.
20
Assignment
DC +
DC -
6.

Operation

6.1

Switch-on and switch-off

Switching the luminaire on and off by
pressing the key
Fig. 6: Key.
X To switch the luminaire on and off, press
the key A on the top side of the lumi-
naire head, see Fig. 6.
Switching the luminaire on and off with-
out pressing the key
The luminaire will switch on when it is sup-
plied with power.
Operation
A