Table of Contents
Advertisement
LED Indicators
The LED indicators shown in Figure 4 are used to verify the unit's operation and status.
LED
Solid Green
POWER
No Light
Slow Flashing Green
READY
Moderate Flashing Green
Solid Green
Solid Red
Blinking Red
Alternating Red/Green
No Light
Solid Green
LINK
No Light
ACTIVITY
Pulsing Yellow
No Light
Note: Modem LEDs will flash while powering up. This intermittent flashing should not be confused with actual operation
status.
030-300153A
Connections are
located on the side
Figure 4. WireSpeed Pro Proxy Router (Front)
State
Table 4. LED States
ADSL WireSpeed Pro 36R570 Proxy Router
Description
Power ON
No power
Power ON and passed power-up diagnostics (1 flash/sec)
Power ON and attempting synchronization (2 flashes/sec)
Power ON and synchronized with the ADSL line card
Hardware power-up in progress
Unit failed power-up diagnostic
Proxy Router diagnostic failed
No power
Link established
No 10Base-T link
Data being transmitted. Pulses should match the
reception or transmission of Ethernet data.
No data on Ethernet interface
10
User Guide
Power
Ready
Link
Activity
WireSpeed Pro Installation
Advertisement
Table of Contents
