Table of Contents
Advertisement
WEBSHARE INSTALLATION UTILITIES SOFTWARE SETUP
Running WebShare Installation Utilities
Account parameters must be added to WebShare before connecting to your ISP or Corporate LAN. Use the Westell-
provided WebShare Installation Utilities to simplify the setup of the following:
•
Selection of the desired Ethernet adapter (in instances where more than one Ethernet adapter exists on the PC).
•
Automatic enabling of DHCP
•
Automatic assignment of the WebShare gateway address of 192.168.0.1
•
Simplified service provider account information installation via the Account Install screen.
We recommend using the WebShare Installation Utilities to automatically configure DHCP on each Windows PC in a
multiple-PC environment. Alternatively, DHCP may be enabled manually on Windows computers. Macintosh and Linux
users must use manual configuration to enable DHCP on their systems.
Operating System:
Windows
Macintosh
Linux
Macintosh and Linux users may access the WebShare Home Page by entering the URL of 192.168.0.1 in their browser
Address/Location field.
Running WebShare Installation Utilities for Windows Operating Systems
To install WebShare Installation Utilities on your computer, insert the WebShare Installation Utilities CD into the CD-ROM
drive. The CD should run automatically. If it does not, click Start > Run from the taskbar and type the following line:
E:\win32\setup.exe (where "E" is the designation of the CD-ROM drive)
1.
Follow the installation wizard. Figure 5 shows the Welcome window.
2.
Click Next. The License Agreement window appears.
3.
Read the license agreement, then click Yes if you accept the agreement. The Function Selection screen appears.
030-300153A
DHCP Configuration:
Automatic or manual
Manual
Manual
Figure 5. Welcome Window
11
ADSL WireSpeed Pro 36R570 Proxy Router
WebShare Account Setup Installation
User Guide
Advertisement
Table of Contents
