Led Indicators; Cable Connectors And Switch Locations - Westell Technologies Router 2400 User Manual

User Guide

4.4 LED Indicators

The LED indicators are located on the front panel of the Router and are used to verify the unit's operation and
status. LED states are described in Table 1.
LED
Slow Flashing Green
Moderate Flashing Green
SYNC
Steady Red (less than 20 sec.)
USB
Ethernet
Ports
1,2,3,4

4.5 Cable Connectors and Switch Locations

The following items are located on the rear panel of the Router. See Table 1. Tables 2 through 5 list the connector
types and pinout designations.
•
DSL Connector (RJ-11)
•
Reset Button
•
ON/OFF Switch
•
Power Connector
•
USB Connector
•
Ethernet Connectors (RJ-45)
DSL
Connector
030-300331 Rev. A
Table 1. LED States and Descriptions
State
Solid Green
Flashing Yellow
Solid Yellow
No Light
Solid Green
Flashing Green
No Light
Solid Green
Flashing Green
No Light
12V
ON/OFF Power
Reset
Switch Connector
Button
Figure 1. Rear Panel
Description
Power ON and waiting for carrier detect signal
(1 flash/sec)
Power ON and attempting synchronization
(2 flashes/sec)
Power ON and synchronized with ADSL line card
Hardware power-up in process
Modem failed self-diagnostics
Modem is in safe boot mode
No Power
USB link established
Transmit or Receive Activity
No USB link established
Ethernet link established
Transmit or Receive Activity
No Ethernet link established
1 2
Ethernet
USB
Connectors
Connector
6
4-Port Router (Model 2400)
4
3
October 2002