Table of Contents
Advertisement
Fasten the set screw using the Allen key. (Tool 1)
7
WARNING: Do not overtighten this screw!
Screw the bowden tube connector into the flexible filament guiding modification.
8
Re-connect the bowden tube into the bowden tube connector by gently pushing it in.
9
10
Clean up and remove obsolete parts and tools
11
Done
9. Flexible filament loading procedure
Loading flexible filament into the extruder is a little bit more challenging compared to regular 3D printing
filament. This is why we added the following procedure to help you load the flexible filament.
Step
Action
The images in this procedure shows loading flexible filament into the right side extruder, the left
NOTE
side can be placed in the same manner.
Use the side cutters (Tool 3) to cut the tip of the flexible filament at an angle
1
H. Kamerlingh Onnesweg 10
2408 AW Alphen aan den Rijn
The Netherlands
5
Advertisement
Table of Contents
