Table of Contents
Advertisement
5. Parts list
#
Description
Flexible filament modification
1
2
3
NOTE: Images are indicative, colours and/or shapes may vary.
6. Additional parts (grab stock)
Make sure the following items are readily available during assembly:
Description
No additional parts needed
NOTE: Images are indicative, colours and/or shapes may vary.
7. Preparation
Unpack all delivered parts and make sure all tool described in section 4 and parts described in section 5 are
available for use.
8. Procedure
The following procedure describes how to change the regular filament funnel inside the extruder with a
modified funnel that enables you to print flexible filament better.
Step
Action
The images in this procedure show the replacement of the right side funnel for flexible filament
NOTE
printing, the left side can be replaced in the same manner.
Remove all filament from the extruder(s) and bowden tube(s).
1
H. Kamerlingh Onnesweg 10
2408 AW Alphen aan den Rijn
The Netherlands
Qty
1
3
Advertisement
Table of Contents
