Huawei SUN2000L User Manual page 29

SUN2000L-(2KTL-5KTL)
User Manual
Installation Environment Requirements



Mounting Structure Requirements




Installation Angle Requirements
The SUN2000L can be wall-mounted or pole-mounted. The installation angle requirements
are as follows:


Figure 4-1 Installation angle
Issue 06 (2020-03-19)
The SUN2000L must be installed in a well-ventilated environment to ensure good heat
dissipation.
When installed under direct sunlight, the power of the SUN2000L may be derated due to
additional temperature rise.
Install the SUN2000L in a sheltered place or install an awning over the SUN2000L.
The mounting structure where the SUN2000L is installed must be fireproof.
Do not install the SUN2000L on flammable building materials.
Ensure that the installation surface is solid enough to bear the weight load.
In residential areas, do not install the SUN2000L on drywalls or walls made of similar
materials which have a weak sound insulation performance because the noise generated
by the SUN2000L is noticeable.
Install the SUN2000L vertically or at a maximum back tilted angle of 15 degrees to
facilitate heat dissipation.
Do not install the SUN2000L at forward tilted, excessively back tilted, side tilted,
horizontal, or upside down positions.
Copyright © Huawei Technologies Co., Ltd.
4 System Installation
23