Installing The Dc Input Power Cable - Huawei SUN2000L User Manual

SUN2000L-(2KTL-5KTL)
User Manual
To remove the AC connector from the SUN2000L, perform the operations in reverse order.
Figure 5-10 Removing a plug insert

5.4 Installing the DC Input Power Cable

Prerequisites



Ensure that the following conditions are met. Otherwise, the SUN2000L will be damaged, or
even become a fire hazard.
Issue 06 (2020-03-19)
Before connecting the DC input power cable, ensure that the DC voltage is within the safe
range (lower than 60 V DC) and that the DC switch on the SUN2000L is OFF. Failing to
do so may result in electric shocks.
When the SUN2000L is operating, it is not allowed to work on DC circuit, such as
connecting or disconnecting a PV string or a PV module in a PV string. Failing to do so
may cause electric shocks.
If no PV string connects to the DC input terminals, do not remove the watertight cap from
the DC input terminals. Otherwise, the SUN2000L will not comply with its Ingress
Protection Rating.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
44