GE GTDP740EDWW Manual page 78

Heater Removal - Gas
Glow Bar Replacement
Note- the igniter can be changed without removing
the complete assembly.
To replace the glow
bar remove the 1- ¼
inch hex screws that
holds the glow bar
to the burner
assembly .
Then slide the
connecter through
the opening on the
bracket opening.
Remove main burner
to gain access to the
¼ inch screw that
holds igniter in place.
Slide unplugged
connecter through
the bracket opening.
Replace Glow
Bar.
Copyright General Electric 2012
12/3/2012
79