Table of Contents
Advertisement
Quick Links
Operation Manual
Woodturning lathe - 61591
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH
Seite 18
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Advertisement
Table of Contents
Related Manuals for WilTec 61591
Summary of Contents for WilTec 61591
- Page 1 Due to further developments, illustrations, functioning steps and technical data can differ insignificantly. Updating the documentation If you have suggestions for improvement or have found any irregularities please contact us. © by WilTec Wildanger Technik GmbH Seite 18 http://www.WilTec.de http://www.aoyue.eu...
- Page 2 The information contained in this document is subject to change without prior notice. No part of this document can be copied or duplicated in another form without the prior written consent of WilTec Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in this user manual or the connection diagram.
- Page 3 Attention! Wear protective goggles. Sparks generated during work or splinters, chips and dust emerging from the unit can lead to loss of visibility. Danger! Risk of injury! Do not reach into rotating workpieces. Direction of rotation © by WilTec Wildanger Technik GmbH Seite 20 http://www.WilTec.de http://www.aoyue.eu...
-
Page 4: Safety Instructions
Always wear safety glasses and head protection, e.g. a construction helmet. Wear tight-fitting work clothing that cannot be gripped by the rotating workpiece. Connect the machine firmly to the substrate. © by WilTec Wildanger Technik GmbH Seite 21 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 5 Wing nut (2x) Wrench for pinion shaft Washer for crank handle Face Plate Original operating instructions Crank handle Safety information Hexagon key © by WilTec Wildanger Technik GmbH Seite 22 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 6: Intended Use
The noise and vibration values were determined in accordance with EN 61029. Operation Sound pressure level LPA 61 dB(A) Uncertainty KPA 3 dB Sound power level LWA 74 dB(A) Uncertainty KWA 3 dB © by WilTec Wildanger Technik GmbH Seite 23 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 7 2) Hearing damage, if no suitable hearing protection is worn. 3) Damage to health resulting from hand-arm vibrations if the device is used for a long period of time or is not properly operated and maintained. © by WilTec Wildanger Technik GmbH Seite 24 http://www.WilTec.de http://www.aoyue.eu...
- Page 8 Use suitable fixing material, e.g. carriage bolts for fixing to a metal base frame. The fixing material is not included in the scope of delivery and is available from specialist dealers. © by WilTec Wildanger Technik GmbH Seite 25 http://www.WilTec.de...
- Page 9 The choice of the correct speed depends on several factors when turning (e.g. size0e, unbalance, material, etc. of the workpiece). As a rule of thumb: non-circular workpieces, large workpieces, hard woods = low speed. © by WilTec Wildanger Technik GmbH Seite 26 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 10: Operation
Do not use wooden discs with shrinkage cracks, as there is a high risk of bursting due to centrifu - gal force. Observe the maximum workpiece sizes (see technical data). In case of blocked tools: pull out the mains plug before troubleshooting! © by WilTec Wildanger Technik GmbH Seite 27 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 11 Remedial action: Loosen belt tension. Reduce the clamping pressure on the tailstock handwheel. Only set high speeds for final and fine treatment of the workpieces. Maintenance © by WilTec Wildanger Technik GmbH Seite 28 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
-
Page 12: Disposal And Recycling
Store the device and its accessories in a dark, dry and frost-free place. The optimum storage tempera - ture is between 5 and 30°C. Keep the power tool in its original packaging. © by WilTec Wildanger Technik GmbH Seite 29 http://www.WilTec.de... -
Page 13: Explosion Drawing
EXPLOSION DRAWING © by WilTec Wildanger Technik GmbH Seite 30 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de... - Page 14 Flat Washer Drive Center Bolt Baffle Cord Sleeve Bearing Cord and Plug Bearing Seat Screw Axis Elastic Washer Switch Flat Washer Flat Washer Back Cover Screw Engine Bearing Seat © by WilTec Wildanger Technik GmbH Seite 31 http://www.WilTec.de http://www.aoyue.eu http://www.teichtip.de...
- Page 15 All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the domestic waste.