Iewing Vehicle Information - Sealey VS8700 Instructions Manual

6) Press ENTER/EXIT button to return to previous menu.
4.5 Viewing Vehicle Information
The Vehicle Info. function enables retrieval of the Vehicle
Identification No. (VIN), Calibration ID(s), Calibration
Verification Nos. (CVNs) and In-use Performance Tracking on
2000 and newer vehicles that support Mode 9.
1) Use SCROLL button to select Vehicle Info. from Diagnostic
Menu and press ENTER/EXIT button.
2) Wait a few seconds or press ENTER/EXIT button to continue.
VS8700 - 1 - 110108
The number "x/x" to the upper right corner of the screen
indicates total number of screens the retrieved data cover
and sequence of currently displayed data.
............Diagnostic
►
5) Vehicle Info.
6) Exit
.................Vehicle
If the vehicle does not support this mode, a "The selected
mode is not supported!" message shows on the display.
If more than one module is detected, you will be prompted
to select a module before test.
Menu...........
Info......................
Turn key on
with engine off!
Press [ENTER] to con.
22
5/6