Erasing Codes - Sealey VS8700 Instructions Manual

3) If more than one DTC is found, use SCROLL button, as
necessary, until all the codes have been shown up.
4) Press ENTER/EXIT button to return to previous menu.

4.2 Erasing Codes

C AUTION:
U
code reader to delete not only the codes from the vehicle's on-board
computer, but also "Freeze Frame" data and manufacturer
enhanced data. Further, the I/M Readiness Monitor Status for all
vehicle monitors is reset to Not Ready or Not Complete status. Do not
erase the codes before the system has been checked completely by a
technician.
VS8700 - 1 - 110108
P0115
Engine Coolant Temperature
Sensor 1 Circuit
The control module number, sequence of the DTC's, total
number of codes detected and type of codes (Generic or
Manufacturer specific, Stored or Pending codes) will be
observed on the upper right hand corner of the display.
If no codes are detected, a "No codes are stored in the
module!" message displays on the screen.
If retrieved DTC's contain any manufacturer specific or
enhanced codes, the display indicates "Manufacturer
control".
P1324
Manufacturer control
Erasing the Diagnostic Trouble Codes may allow the
U
$11 Pd
Generic
$09 4/6
Other
16
1/6