Precaution; Specific Service Instructions; System Set-Up - Kenwood NX-1200 Series Service Manual

This service manual does not describe PRECAUTION.
2.1

SYSTEM SET-UP

Merchandise received
Select the type of transceiver
Transceiver programming
Are you using the optional antenna?
Are you using the speaker microphone?
Delivery

PRECAUTION

SPECIFIC SERVICE INSTRUCTIONS

A personal computer, programming interface (KPG-22U),
and FPU (programming software) are required for programming.
(The frequency, TX power HI/MID/LOW, and signaling data are
programmed for the transceiver.)
YES
NO
YES
NO
SECTION 1
SECTION 2
Type Frequency range (MHz)
NX-1200DV K DMR
NX-1200D K DMR
NX-1200NV K NXDN
NX-1200N K NXDN
NX-1300DU K4 DMR
NX-1300D K4 DMR
NX-1300NU K4 NXDN
NX-1300N K4 NXDN
KRA-22 or KRA-26 (for NX-1200)
KRA-23 or KRA-27 (for NX-1300)
Optional antenna
(Option)
KMC-21, KMC-45D or KMC-48GPS
Speaker microphone
(Option)
RF power
TX/RX 136~174 5W
TX/RX 136~174 5W
TX/RX 136~174 5W
TX/RX 136~174 5W
TX/RX 400~470 5W
TX/RX 400~470 5W
TX/RX 400~470 5W
TX/RX 400~470 5W
The KMC-48GPS does not support DMR.
(No.RA077<Rev.001>)1-5